Well Pressure Switches Video

Square D pressure switch

Thank you, simple, ...
Thank you, simple, clear explanation, my new pump has dropped from 60? psi to 50 psi in 3 months, will adjust #2.

I just? fixed my ...
I just? fixed my pump, thanks!

Thanks for the ...
Thanks for the video. It helps. I have a pump at the cottage that wont shut off. The pressure builds up....to about 60, then pump keeps running. The switch is identical to the one in your video. I will be going to cottage soon, so I have some questions. - what size tubing do I buy from Home Depot, that goes from pump to switch? Is it? just regular 1/4 plumbing tubing? How do I know which switch to buy - 20/40? 30/50? How do I clean the nozzle at the pump end and switch end? Toothpick? Thanks!

@sladecreeboy sent ...
@sladecreeboy sent you an? e-mail

my pressure gauge ...
my pressure gauge is stuck past a 100 psi also the submerged pump works? then shuts off after 15 sec

@spindizzy1969 my ...
@spindizzy1969 my pressure gauge is stuck too same? problem whats wrong with it

@beatjugglez I've ...
@beatjugglez I've also had this happen when somehow an air bubble gets into the? tank. The tank needs to be drained at the tank. One symptom was the water pressure needle made large sweeps. The motor would turn off and on every 5-10 seconds.

Perhaps there is a ...
Perhaps there is a difference I am unaware of however upon looking on? the front plastic portion of the Square D switch I have on my pump and the ones on the shelf, below the terminal screws I see L1 & L2 designations on the two outer most terminals and the two inner terminal screws as T-1 (Line-Out to the pump motor). This is verifiable with a visual inspection where you can see where the contacts are connected or with a meter that detects conductivity when the contacts are closed.

@beatjugglez Your ...
@beatjugglez Your pressure tank is waterlogged, it needs to have air in it, can't be all water. Need to charge the? tank, as needed. Could be a bad tank or baffle in the tank.

what should i do if ...
what should i do if i have th off/on/off/on condition? it keeps blowing? my breaker. please help :)

just wacthed a ...
just wacthed a video? that said the other screw changes pressure. Please help which one?

Very informative ...
Very informative and btw square d pressure switches are great switches?

You are AWESOME!! ...
You are AWESOME!! Very informative and thorough:)? Thanks!!!

thanks? for the ...
thanks? for the info! , it gave me just the help i was looking for.

Thanks for? the ...
Thanks for? the info!

Just the info? I ...
Just the info? I was looking for! Thanks for saving me a bunch of cash!

Thank you? for a ...
Thank you? for a very informative video. I have been unsuccessful in setting the high and low pressure switch for sometime, now I have to try to just adjust knob #1 to set it at 15/35psi.

It? answered my ...
It? answered my Question, thank you

Good? stuff!
Good? stuff!

thanks bob?
thanks bob?

Dispatcher Bob, you ...
Dispatcher Bob, you are the Man!! Thanks for the informative video. I do want to know if you can answer a question I have? My pump runs constantly,? I have a Flotec 82 gal pre charge tank. The pressure gauge appears stuck beyond 100psi, whether the pump is on or off. I knock the tank and it sounds different at the bottom than the top. I think the diaphragm is ok. Do you think the pressure switch is faulty?

---